• Please note: In an effort to ensure that all of our users feel welcome on our forums, we’ve updated our forum rules. You can review the updated rules here: http://forums.wolflair.com/showthread.php?t=5528.

    If a fellow Community member is not following the forum rules, please report the post by clicking the Report button (the red yield sign on the left) located on every post. This will notify the moderators directly. If you have any questions about these new rules, please contact support@wolflair.com.

    - The Lone Wolf Development Team

Pathfinder Bug Reports - version 6.13

Status
Not open for further replies.
I'm getting this too.

Also, I'm trying to recreate my character in a new file, and the Fox is not available as an option for my Familiar.
 
I just noticed that Craft (Armor) skill is listed twice, and they have two very similar IDs: skCrafArm and skCrafArmr

I'm assuming this is just an accidental double entry
 
When using the editor, the "choose source thing" filter doesn't seem to work properly anymore. At least, when I try to pick just Skills it only gives me "Validation Log" as a choice. Filtering for Race gives me only "transact". All items are still listed when not filtering.
 
huntercc said:
I just noticed that Craft (Armor) skill is listed twice, and they have two very similar IDs: skCrafArm and skCrafArmr

I'm assuming this is just an accidental double entry
Click to expand...
Been that way for long time. They can't remove just one as that would cause x number of characters to break as LW has now way to know which skill was taken by gamers.
 
ShadowChemosh said:
Been that way for long time. They can't remove just one as that would cause x number of characters to break as LW has now way to know which skill was taken by gamers.
Click to expand...

Fix for that is to make one a replacement for the other. Using the replace thing tag. ;) Then hide the replaced skill.

BAM fixed.
 
dartnet said:
Fix for that is to make one a replacement for the other. Using the replace thing tag. ;) Then hide the replaced skill.

BAM fixed.
Click to expand...
Except that prevents someone like me from doing a replace Id against that skill then. Which would be bad as it prevents the community from putting house rules in for that skill. :(
 
Provos said:
I just updated Hero Lab. I now have this error showing up on my character

Code: 
Usage pool 'psiPPUsed' has been orphaned for pick index '0'
Usage pool 'jXP' has been orphaned for pick index '0'
Usage pool 'jSP' has been orphaned for pick index '0'
Usage pool 'jPrestige' has been orphaned for pick index '0'
Usage pool 'jPresSpent' has been orphaned for pick index '0'
Usage pool 'facPresSpt' has been orphaned for pick index '0'
Usage pool 'facPresTPA' has been orphaned for pick index '0'
Usage pool 'jPP' has been orphaned for pick index '0'
Usage pool 'jGP' has been orphaned for pick index '0'
Usage pool 'jCP' has been orphaned for pick index '0'

Any ideas?
Click to expand...
I'm also getting the "has been orphaned for pick index '0'" error message. When first loading up a *.por file created using a version 3.8 or less the *.por file loads fine. Once you save the *.por file in version 3.9 and reload the *.por file, the error msg's appear. No changes have been made to the *.por file other than a load then immediate save in version 3.9.
 
Also, in recreating some iconics, I've just tried to create Feiya (iconic witch), and "Fox" doesn't seem to be available for a witch's familiar. I've ensured that Ultimate Magic is enabled, but it's not showing up in the list.
 
There is no adjustment for Archaeologist Luck in the Adjustment tab. Sorry, I was wrong its on the In-Play tab
 
Last edited:
Bestiary 3 Animal Lord Template

I downloaded the new data set for the Bestiary 3. However I can not figure out how to create a character with the Animal Lord template from the Bestiary. It almost looks like it is missing? If so, what are the plans to add it. And if not, where do I find it! Thanks in advance.
 
I know there was several "Search" type issues already reported but I wanted to report one from inside the HL Editor. The "Find Thing.." where you can select a specific section of Things to search is no longer working.

In the attached picture I have selected "Spell" and one can clearly see that feats and traits are displaying in the list.

Thanks
 

Attachments

  • Image1.jpg
    Image1.jpg
    68.8 KB · Views: 19
ShadowChemosh said:
I know there was several "Search" type issues already reported but I wanted to report one from inside the HL Editor. The "Find Thing.." where you can select a specific section of Things to search is no longer working.

In the attached picture I have selected "Spell" and one can clearly see that feats and traits are displaying in the list.

Thanks
Click to expand...

Feats come up with Abilities.
 
dartnet said:
Feats come up with Abilities.
Click to expand...
I am not sure what you trying to say here? But Abilities and Racial Abilities have always displayed separate from Feats.

It does not matter what you pick now but the list of Things is always the same. Exactly the same. Which means it no longer nicely allows one to sub-select the list of Things.

I use this feature of the editor ALLOT as I can't in anyway remember the Unique ID's for things. Even after a year+ of using HL. :p :)
 
Harrek said:
I downloaded the new data set for the Bestiary 3. However I can not figure out how to create a character with the Animal Lord template from the Bestiary. It almost looks like it is missing? If so, what are the plans to add it. And if not, where do I find it! Thanks in advance.
Click to expand...

Animal Lord was one of a few things that was left out of the Bestiary 3 files, because the abilities it adds are based on what animal is picked it is extremely variable. For example, if you pick the Cheetah as your animal, you get sprint. If you pick Lion you instead get Pounce and Grab. If you Pick Leopard you get both Pounce, and Grab and also a 20 ft climb speed. If you pick elephant you get trample... so on and so forth, you get the picture.

We don't have an easy way to do this at the moment. Although perhaps in the future we will.

Unfettered Eidolon is the other thing we still have to do, before anyone else reports it.
 
ShadowChemosh said:
It does not matter what you pick now but the list of Things is always the same. Exactly the same. Which means it no longer nicely allows one to sub-select the list of Things.
Click to expand...

I reported this earlier as well, but for me I get a different list if I change the filter... for example, when I'm looking for Skills it only gives me "Validation Log" as a choice. Interesting that you see the same list every time.
 
Aaron said:
Animal Lord was one of a few things that was left out of the Bestiary 3 files, because the abilities it adds are based on what animal is picked it is extremely variable. For example, if you pick the Cheetah as your animal, you get sprint. If you pick Lion you instead get Pounce and Grab. If you Pick Leopard you get both Pounce, and Grab and also a 20 ft climb speed. If you pick elephant you get trample... so on and so forth, you get the picture.

We don't have an easy way to do this at the moment. Although perhaps in the future we will.
Click to expand...

This is how I would do it. :D

I would start with buliding a base template and having the different Species be configures. Kind of like the Ogerkin.

So the base Template would add

+2 CR

Force a Neutral Alignment.

Give a DR10\Silver

+4 to all ability scores

Add Shape Change and Dominion

Change the Type to Outsider (Native) and add the Shapechanger Subtype.

The 15 base animals could be added in the configurable these would have the Affinity special ability and the basic natural attacks, and special abilities for the animal.

Animals not in the basic set can be built in the editor using the base animals as an example.

A user would have to do some adjustments using the Personal tab to adjust for the differences between the animal and the base creature for CR, abilities, skills, movement types, and natural AC.

Hope this helps.
 
I'm using Hero Lab on my netbook under WINE 1.2.3 in Ubuntu 11.10, and am experiencing frequent crashes on various different tasks (usually when clicking on a dropdown / combo box). I tried switching off automatic updates as this was suggested as a possible cause elsewhere on the forum. Unfortunately, when I click ok to save the change, the program crashes. I've run it via the terminal and here is the output when Hero Lab crashes:

Code: 
fixme:wininet:InternetSetOptionW Option INTERNET_OPTION_CONNECT_TIMEOUT (30000): STUB
fixme:wininet:InternetSetOptionW INTERNET_OPTION_SEND/RECEIVE_TIMEOUT/DATA_SEND_TIMEOUT 30000
fixme:wininet:InternetSetOptionW Option INTERNET_OPTION_CONNECT_TIMEOUT (30000): STUB
fixme:wininet:InternetSetOptionW INTERNET_OPTION_SEND/RECEIVE_TIMEOUT/DATA_SEND_TIMEOUT 30000
fixme:wininet:InternetSetOptionW Option INTERNET_OPTION_CONNECT_TIMEOUT (30000): STUB
fixme:wininet:HTTPREQ_SetOption unsupported without active connection
fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do!
fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do!
fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do!
fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do!
fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do!
fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do!
fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do!
fixme:wininet:InternetSetOptionW Option INTERNET_OPTION_CONNECT_TIMEOUT (30000): STUB
fixme:wininet:InternetSetOptionW INTERNET_OPTION_SEND/RECEIVE_TIMEOUT/DATA_SEND_TIMEOUT 30000
fixme:wininet:InternetSetOptionW Option INTERNET_OPTION_CONNECT_TIMEOUT (30000): STUB
fixme:wininet:InternetSetOptionW INTERNET_OPTION_SEND/RECEIVE_TIMEOUT/DATA_SEND_TIMEOUT 30000
fixme:wininet:InternetSetOptionW Option INTERNET_OPTION_CONNECT_TIMEOUT (30000): STUB
fixme:wininet:HTTPREQ_SetOption unsupported without active connection
fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do!
fixme:wininet:InternetSetOptionW Option INTERNET_OPTION_CONNECT_TIMEOUT (30000): STUB
fixme:wininet:InternetSetOptionW INTERNET_OPTION_SEND/RECEIVE_TIMEOUT/DATA_SEND_TIMEOUT 30000
fixme:wininet:InternetSetOptionW Option INTERNET_OPTION_CONNECT_TIMEOUT (30000): STUB
fixme:wininet:InternetSetOptionW INTERNET_OPTION_SEND/RECEIVE_TIMEOUT/DATA_SEND_TIMEOUT 30000
fixme:wininet:InternetSetOptionW Option INTERNET_OPTION_CONNECT_TIMEOUT (30000): STUB
fixme:wininet:HTTPREQ_SetOption unsupported without active connection
fixme:wininet:InternetSetOptionW Option INTERNET_OPTION_CONNECT_TIMEOUT (30000): STUB
fixme:wininet:InternetSetOptionW INTERNET_OPTION_SEND/RECEIVE_TIMEOUT/DATA_SEND_TIMEOUT 30000
fixme:wininet:InternetSetOptionW Option INTERNET_OPTION_CONNECT_TIMEOUT (30000): STUB
fixme:wininet:InternetSetOptionW INTERNET_OPTION_SEND/RECEIVE_TIMEOUT/DATA_SEND_TIMEOUT 30000
fixme:wininet:InternetSetOptionW Option INTERNET_OPTION_CONNECT_TIMEOUT (30000): STUB
fixme:wininet:HTTPREQ_SetOption unsupported without active connection
fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do!
fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do!
X Error of failed request:  BadAlloc (insufficient resources for operation)
  Major opcode of failed request:  53 (X_CreatePixmap)
  Serial number of failed request:  140193
  Current serial number in output stream:  140278
 
Status
Not open for further replies.
Back
Top