Sideboard and max duplicate card rules.

[jim at timewarpcomics.com]

I'm trying to implement deck construction rules.

One rule is that a sideboard must be 0 or 15 cards.

The other is that there can't be more than 5 duplicates of any one
card in both in the sideboard and deck combined.

BTW: These are for the data files I'm doing for doomtrooper. (Yes I
still play it).


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Sell a Home with Ease!
http://us.click.yahoo.com/SrPZMC/kTmEAA/MVfIAA/WuQolB/TM
---------------------------------------------------------------------~->

 

[rob]

The sideboard size limit should be very simple. Obviously, it's a deck
rule, and the scope of the rule is whichever deck you've designated as the
sideboard (e.g. "deck2"). To impose the sideboard rule, you can use the '$'
term, which reports the total number of cards in the scope. So the rule
should look like:
($ = 0) | ($ = 15)

The second rule is a card scoping rule, since it applies to a single card
at a time. However, since it has to span multiple decks, the proper scope
needs to be "span". Since the limit applies to the count of each card, you
can use the '#' special term for card rules to obtain that count.
Therefore, verifying that you don't have more than 5 of a particular card
across all decks would look like:
(# <= 5)

That should cover both the rules. They're easy ones to implement.

Hope this helps,
Rob

At 06:59 AM 10/6/2002 +0000, you wrote:
>I'm trying to implement deck construction rules.
>
>One rule is that a sideboard must be 0 or 15 cards.
>
>The other is that there can't be more than 5 duplicates of any one
>card in both in the sideboard and deck combined.
>
>BTW: These are for the data files I'm doing for doomtrooper. (Yes I
>still play it).


---------------------------------------------------------------------------
Rob Bowes (rob@wolflair.com) (559) 658-6995
Lone Wolf Development www.wolflair.com


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Plan to Sell a Home?
http://us.click.yahoo.com/J2SnNA/y.lEAA/MVfIAA/WuQolB/TM
---------------------------------------------------------------------~->

 

[jim at timewarpcomics.com]

Yep. that works. thanks rob.



--- In cardvault@y..., Rob Bowes <rob@w...> wrote:
> The sideboard size limit should be very simple. Obviously, it's a deck
> rule, and the scope of the rule is whichever deck you've designated
as the
> sideboard (e.g. "deck2"). To impose the sideboard rule, you can use
the '$'
> term, which reports the total number of cards in the scope. So the rule
> should look like:
> ($ = 0) | ($ = 15)
>
> The second rule is a card scoping rule, since it applies to a single
card
> at a time. However, since it has to span multiple decks, the proper
scope
> needs to be "span". Since the limit applies to the count of each
card, you
> can use the '#' special term for card rules to obtain that count.
> Therefore, verifying that you don't have more than 5 of a particular
card
> across all decks would look like:
> (# <= 5)
>
> That should cover both the rules. They're easy ones to implement.
>
> Hope this helps,
> Rob
>
> At 06:59 AM 10/6/2002 +0000, you wrote:
> >I'm trying to implement deck construction rules.
> >
> >One rule is that a sideboard must be 0 or 15 cards.
> >
> >The other is that there can't be more than 5 duplicates of any one
> >card in both in the sideboard and deck combined.
> >
> >BTW: These are for the data files I'm doing for doomtrooper. (Yes I
> >still play it).
>
>
>
---------------------------------------------------------------------------
> Rob Bowes (rob@w...) (559) 658-6995
> Lone Wolf Development
www.wolflair.com


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Plan to Sell a Home?
http://us.click.yahoo.com/J2SnNA/y.lEAA/MVfIAA/WuQolB/TM
---------------------------------------------------------------------~->