D
doc_savage_2001 at yahoo.
Guest
Before I start entering data for my L5R sets, I wanted to get all my
Shadowfist cards entered. I noticed the following things:
1) Flashpoint Info cards are included in Card Vault (strangely,
they're listed as Character type cards, Info cards should have their
OWN category) but Shaolin Sanctuary Info cards (there are two of
them) are NOT included.
2) "I Ching", an unaligned Edge card is included in the Limited
Edition lists but not Standard Edition lists. This card IS in
Standard Edition. (I have one.)
3) "Molten Heart", a Four Monarchs Edge card, is listed as a Jammers
faction card (and is found under that faction in Card Vault). It is a
Four Monarchs faction card.
4) There is a card set called "Netherworld" and one
called "Netherworld 2". This causes a problem on the Inventory
screens since the Edition field is not wide enough to display the
full title of the set and users don't currently have any ability to
change the Inventory displays to widen the field. I had to constantly
filter on/filter off to figure out which set was which on the
inventory screen. Since Netherworld 2 reprinted some Netherworld
cards, this happened too often for my tastes.
5) Shadowfist uses a combination of "Most Recently Printed" and "Play
as Printed" for those cards with the same titles for which multiple
editions occur. Card Vault gets around the "Play as Printed" cards by
putting a (1), (2), (3), etc. in the card name so they don't collapse
on each other when the Merge functionality is turned on. This is
good, I like it this way. However, there are currently 2 problems I
see.
5a) Certain characters appear in cross factions (Rhys Engel as
Architects/Purist, Thing with 10,000 Tongues as Lotus/Architects,
Jason X as Dragon/Architect). As none of these multiple versions have
the little MRP symbol on it, all of these characters should ALSO have
the (1) (2) (3) etc on them so they don't collapse on each other with
Merge on. (i.e. There should be a Jason X (1) and a Jason X (2), a
Rhys Engel (1) and a Rhys Engel (2) etc.)
5b) Cards that are reprinted in Limited and Standard are identical
and should share numbers, same with some other reprints. For
instance, there is Alchemist's Lair (1), (2), (3), and (4), one for
Limited, Standard, Flashpoint and Dark Future sets. But there should
only really be Alchemist's Lair (1) (covering Limited and Standard)
and Alchemist's Lair (2) (covering Flashpoint and Dark Future).
Thanks again!
Doc
Shadowfist cards entered. I noticed the following things:
1) Flashpoint Info cards are included in Card Vault (strangely,
they're listed as Character type cards, Info cards should have their
OWN category) but Shaolin Sanctuary Info cards (there are two of
them) are NOT included.
2) "I Ching", an unaligned Edge card is included in the Limited
Edition lists but not Standard Edition lists. This card IS in
Standard Edition. (I have one.)
3) "Molten Heart", a Four Monarchs Edge card, is listed as a Jammers
faction card (and is found under that faction in Card Vault). It is a
Four Monarchs faction card.
4) There is a card set called "Netherworld" and one
called "Netherworld 2". This causes a problem on the Inventory
screens since the Edition field is not wide enough to display the
full title of the set and users don't currently have any ability to
change the Inventory displays to widen the field. I had to constantly
filter on/filter off to figure out which set was which on the
inventory screen. Since Netherworld 2 reprinted some Netherworld
cards, this happened too often for my tastes.
5) Shadowfist uses a combination of "Most Recently Printed" and "Play
as Printed" for those cards with the same titles for which multiple
editions occur. Card Vault gets around the "Play as Printed" cards by
putting a (1), (2), (3), etc. in the card name so they don't collapse
on each other when the Merge functionality is turned on. This is
good, I like it this way. However, there are currently 2 problems I
see.
5a) Certain characters appear in cross factions (Rhys Engel as
Architects/Purist, Thing with 10,000 Tongues as Lotus/Architects,
Jason X as Dragon/Architect). As none of these multiple versions have
the little MRP symbol on it, all of these characters should ALSO have
the (1) (2) (3) etc on them so they don't collapse on each other with
Merge on. (i.e. There should be a Jason X (1) and a Jason X (2), a
Rhys Engel (1) and a Rhys Engel (2) etc.)
5b) Cards that are reprinted in Limited and Standard are identical
and should share numbers, same with some other reprints. For
instance, there is Alchemist's Lair (1), (2), (3), and (4), one for
Limited, Standard, Flashpoint and Dark Future sets. But there should
only really be Alchemist's Lair (1) (covering Limited and Standard)
and Alchemist's Lair (2) (covering Flashpoint and Dark Future).
Thanks again!
Doc
