-
Please note: In an effort to ensure that all of our users feel welcome on our forums, we’ve updated our forum rules. You can review the updated rules here: http://forums.wolflair.com/showthread.php?t=5528.
If a fellow Community member is not following the forum rules, please report the post by clicking the Report button (the red yield sign on the left) located on every post. This will notify the moderators directly. If you have any questions about these new rules, please contact support@wolflair.com.
- The Lone Wolf Development Team
Psionics
- Thread starter tooley1chris
- Start date
Ok I was able to change the spell list to the mystic's. I am unsure how to limit the selections to the Awakened and Knife Disciplines. But it is at least usable. As mentioned it requires wheelercub's Mystic file posted above.
Here it is if anyone wants it. Feel free to let me know if you find problems with it.
https://drive.google.com/file/d/0B7cAdyNszU-pcXVZUVhsclpYelk/view?usp=sharing
Here it is if anyone wants it. Feel free to let me know if you find problems with it.
https://drive.google.com/file/d/0B7cAdyNszU-pcXVZUVhsclpYelk/view?usp=sharing
And here is the Psychic Warrior Fighter Archetype...
https://drive.google.com/file/d/0B7cAdyNszU-pWU41cm9RRlZxcFU/view?usp=sharing
https://drive.google.com/file/d/0B7cAdyNszU-pWU41cm9RRlZxcFU/view?usp=sharing
Finally, I corrected some errors in wheelercub's Mystic user file. Additionally, I flagged the psionic devotions so that the Lurk and Psychic Warriors have the appropriately limited power list. Note in my version changed the ability score back to INT from CHA. This can be easily changed back if that is your preference.
https://drive.google.com/file/d/0B7cAdyNszU-pMWtlNlVoZjJjOGs/view?usp=sharing
https://drive.google.com/file/d/0B7cAdyNszU-pMWtlNlVoZjJjOGs/view?usp=sharing
Last edited:
Ok so I have merged all of the above into a single file.
I'm going to throw a warning out now. I will need to change alot to get this compatible with alot of the standard conventions we apply to the 5e Community Pack. What this means is I will be changing all the names etc.
Just an early heads up, because once this is released, everyone with the original copy of the file will likely get an error or two or twenty.
I'm going to throw a warning out now. I will need to change alot to get this compatible with alot of the standard conventions we apply to the 5e Community Pack. What this means is I will be changing all the names etc.
Just an early heads up, because once this is released, everyone with the original copy of the file will likely get an error or two or twenty.
Ok I have uploaded the file to GitHub. An issue has been created to consolidate conversation related to this file for anyone wanting to make further changes to the version that will be pushed out with the Community Pack.
GitHub Issue for Conversation / GitHub File
Love your work guys, this is going to take me a full day to dissect I reckon. Will push it out with the next release of the 5E Community Pack.
GitHub Issue for Conversation / GitHub File
Love your work guys, this is going to take me a full day to dissect I reckon. Will push it out with the next release of the 5E Community Pack.
Not sure if this should be its own thread or just attached here. I will put it here for now as it relates to the psionics...
So the psionic disciplines are all set at level 1 due to the fact that they have increased effects based on the psi points you expend when you activate them. Instead of levels they are broken down by greater and lesser disciplines. For the Mystic class you cannot select greater disciplines until 5th level. For the Lurk and Psychic Warrior archetypes you must be 13th level to select greater disciplines. This makes selecting powers somewhat counter intuitive because at first glance in HL they all appear to simply be level powers.
What I was wondering is if there is a way to check for the tags to determine if a discipline is greater or lesser and restrict the selection list based on the class level? I know next to nothing about the scripting in HL and pretty much all things I have done thus far is tweaking what others have already done so I am clueless as to the feasibility of this request.
EDIT: To clarify I know spell selection at this point shows spells of all levels but they are at least sorted by level to make selection easier. Psionics being all level one are all grouped together with no easy distinction between greater and lesser powers without clicking on and reading the write for each power.
So the psionic disciplines are all set at level 1 due to the fact that they have increased effects based on the psi points you expend when you activate them. Instead of levels they are broken down by greater and lesser disciplines. For the Mystic class you cannot select greater disciplines until 5th level. For the Lurk and Psychic Warrior archetypes you must be 13th level to select greater disciplines. This makes selecting powers somewhat counter intuitive because at first glance in HL they all appear to simply be level powers.
What I was wondering is if there is a way to check for the tags to determine if a discipline is greater or lesser and restrict the selection list based on the class level? I know next to nothing about the scripting in HL and pretty much all things I have done thus far is tweaking what others have already done so I am clueless as to the feasibility of this request.
EDIT: To clarify I know spell selection at this point shows spells of all levels but they are at least sorted by level to make selection easier. Psionics being all level one are all grouped together with no easy distinction between greater and lesser powers without clicking on and reading the write for each power.
Last edited:
Okay, so, I THINK figured out how to save the .user file to my MacBook desktop. I THINK I figured out how to import it to Hero Labs on the Mac, and I THINK i made the HL file properly. However, i keep getting an error on my iPad saying:
"(no user sources defined)
Your license does not have access to this setting.
No user sources are currently defined. Once one or more is defined by the editor, they will appear here."
That being said, I have paid for the full license on HL, and I am moderately certain (though that confidence is dwindling fast) that I created the .HL file properly. Anyone able to give a true n00b some assistance?
EDIT: I get the same "license denial" message on my MacBook when trying to access "user sources". ACK!
"(no user sources defined)
Your license does not have access to this setting.
No user sources are currently defined. Once one or more is defined by the editor, they will appear here."
That being said, I have paid for the full license on HL, and I am moderately certain (though that confidence is dwindling fast) that I created the .HL file properly. Anyone able to give a true n00b some assistance?
EDIT: I get the same "license denial" message on my MacBook when trying to access "user sources". ACK!
Last edited:
hmmm.... OkayI figured it out. Not too complex but I realized what I needed was a fresh .user filed saved.
I know I won't be any help on this in the future, as most of what I did was some mostly-blind-but-mildly-intelligent guessing. And a ALOT of going through the forums and Lone Wolf site to figure where I went wrong.
So, daplunk and Hansmo, even tho you might not think you helped, it did, knowing that if I needed and you could provide, you would have answered.
Knowing that this community is so responsive is VERY helpful. Thanks!
I know I won't be any help on this in the future, as most of what I did was some mostly-blind-but-mildly-intelligent guessing. And a ALOT of going through the forums and Lone Wolf site to figure where I went wrong.
So, daplunk and Hansmo, even tho you might not think you helped, it did, knowing that if I needed and you could provide, you would have answered.
Knowing that this community is so responsive is VERY helpful. Thanks!
Ok team,
Absolutely well done on this one. I can see a hell of alot of work went into it.
The file will be pushed out with the next release but for those of you wanting to test it now, you can get it from HERE.
You want to copy all of the content from within the zipped folder into your 5e folder. For most of us that should be:
C:\ProgramData\Hero Lab\data\5e
Then restart Hero Labs or 'Quick Reload Data Files' for those with debugging turned on. You will need to enable the Psionic Handbook under the homebrew section of the character configuration screen (Character > Configure Character).
There are still a few things to complete. The feats will need coding for example.
WARNING: Pretty much every single named thing in this file has been changed from the original to comply with the 5e Community Pack naming convention. This means anyone with the original copy of the file file linked above is going to run into a host of errors. I would recommend removing the original files from your system prior to loading this.
WARNING: Any characters made with the original content will need to be remade.
@wheelercub: I have removed all options from your original file not related to the Psionic Handbook. You will need to therefore remove all of the options for the Psionic Handbook from your file leaving just the custom options you have created.
If anyone would like to make further changes to the file please get in contact with me, happy to show you how to do it in GitHub so that everyone is working from the same file.
Absolutely well done on this one. I can see a hell of alot of work went into it.
The file will be pushed out with the next release but for those of you wanting to test it now, you can get it from HERE.
You want to copy all of the content from within the zipped folder into your 5e folder. For most of us that should be:
C:\ProgramData\Hero Lab\data\5e
Then restart Hero Labs or 'Quick Reload Data Files' for those with debugging turned on. You will need to enable the Psionic Handbook under the homebrew section of the character configuration screen (Character > Configure Character).
There are still a few things to complete. The feats will need coding for example.
WARNING: Pretty much every single named thing in this file has been changed from the original to comply with the 5e Community Pack naming convention. This means anyone with the original copy of the file file linked above is going to run into a host of errors. I would recommend removing the original files from your system prior to loading this.
WARNING: Any characters made with the original content will need to be remade.
@wheelercub: I have removed all options from your original file not related to the Psionic Handbook. You will need to therefore remove all of the options for the Psionic Handbook from your file leaving just the custom options you have created.
If anyone would like to make further changes to the file please get in contact with me, happy to show you how to do it in GitHub so that everyone is working from the same file.
I did a really quick and dirty version of Wild Talent Feat by copying and altering Magic Initiate Feat which it very closely resembles. The differences that are beyond me...how to force it to Psionic Talents and Disciplines rather than choosing from any caster class list. Also unlike Magic Initiate which adds a 1 x day use of a first level spell, it adds 2 Psi (Spell) Points. I am uncertain how to or even if it is possible to manipulate spell points.
wheelercub
Active member
Wow, great work everyone! Can't wait to see them added to the full Community Pack.
@daplunk - sorry for the late reply. Been crazy busy at work here. Regarding the Warforged and Ranger v2, those can be deleted or modified accordingly. The Warforged was from some homebrew that a friend of mine wanted to play in our campaign, so I did my best to add it so the HL character sheet included his bonuses. It should probably be scrapped in lieu of the supplemental material version of the WF.
The Ranger was just the beginning of the recent v2 changes that Wizards of the Coast released to the public. I started playing around with it, but never finished. I keep getting stuck on the Combat Style selection code because I don't know where to find examples of it. Same thing goes for the Psionic Knife subclass, which also requires a Combat Style selection. So I kind of hacked that for a player who wanted Two Weapon Fighting, but for some reason the offhand bonus never applied in HL.
With all that said, I really want the new Ranger added to HL, but haven't had time to add it and because I can't get past the Combat Style selection, I just never finished. If someone can add that, I would greatly appreciate it. Otherwise, if someone could send me the Combat Style code, I can try to add the rest by myself and upload the file again.
The Ranger V2: https://drive.google.com/file/d/0BwZoXORhZHGwN2Q1V2FCSEVhVHc/view?usp=sharing
Official post (same PDF content, not as pretty): http://dnd.wizards.com/articles/features/unearthed-arcana-ranger-revised
@daplunk - sorry for the late reply. Been crazy busy at work here. Regarding the Warforged and Ranger v2, those can be deleted or modified accordingly. The Warforged was from some homebrew that a friend of mine wanted to play in our campaign, so I did my best to add it so the HL character sheet included his bonuses. It should probably be scrapped in lieu of the supplemental material version of the WF.
The Ranger was just the beginning of the recent v2 changes that Wizards of the Coast released to the public. I started playing around with it, but never finished. I keep getting stuck on the Combat Style selection code because I don't know where to find examples of it. Same thing goes for the Psionic Knife subclass, which also requires a Combat Style selection. So I kind of hacked that for a player who wanted Two Weapon Fighting, but for some reason the offhand bonus never applied in HL.
With all that said, I really want the new Ranger added to HL, but haven't had time to add it and because I can't get past the Combat Style selection, I just never finished. If someone can add that, I would greatly appreciate it. Otherwise, if someone could send me the Combat Style code, I can try to add the rest by myself and upload the file again.
The Ranger V2: https://drive.google.com/file/d/0BwZoXORhZHGwN2Q1V2FCSEVhVHc/view?usp=sharing
Official post (same PDF content, not as pretty): http://dnd.wizards.com/articles/features/unearthed-arcana-ranger-revised
The new ranger is already done. TheEnthusiast recently added it and we're are prepping the next release currently. I can't urge enough, if you have the skills (which i can see you do) and interest in adding content, come over to the GitHub and work with us. Then we have the skill-set, the same data and the ability to share it with the world.
Last edited: