• Please note: In an effort to ensure that all of our users feel welcome on our forums, we’ve updated our forum rules. You can review the updated rules here: http://forums.wolflair.com/showthread.php?t=5528.

    If a fellow Community member is not following the forum rules, please report the post by clicking the Report button (the red yield sign on the left) located on every post. This will notify the moderators directly. If you have any questions about these new rules, please contact support@wolflair.com.

    - The Lone Wolf Development Team

Orphaned data entries?

  • Thread starter Thread starter hunter.rose at att.net
  • Start date Start date
OK, just downloaded v1.1. Got an error upon loading up my Warlord and L5R files, I got this:

The following warnings occured:
Saved filter is inconsistant with data files. U sing default.
Saved inventory filter is inconsistnat with data files. Using default.

I also got some "orphaned" entries from my Warlord database.

So how bad did I just screw up?
 
--- In cardvault@yahoogroups.com, "Alex Durden <hunter.rose@a...>"
<hunter.rose@a...> wrote:
> OK, just downloaded v1.1. Got an error upon loading up my Warlord
and L5R files, I got this:
>
> The following warnings occured:
> Saved filter is inconsistant with data files. U sing default.
> Saved inventory filter is inconsistnat with data files. Using
default.
>
> I also got some "orphaned" entries from my Warlord database.
>
> So how bad did I just screw up?

Not bad at all, I have had this happened to me as well, just go into
the CV folder, then data, then into Warlords. Open the data file
called orphans-######## (bunch of digits) and see what cards are
listed. Just go into Card Vault and fix those cards entry (how mnay u
have etc) and then recheck to make sure everything is ok. Atleast
thats what I have done, and it fixed the problem


------------------------ Yahoo! Groups Sponsor ---------------------~-->
New Yahoo! Mail Plus. More flexibility. More control. More power.
Get POP access, more storage, more filters, and more.
http://us.click.yahoo.com/Hcb0iA/P.iFAA/46VHAA/WuQolB/TM
---------------------------------------------------------------------~->
 
--- In cardvault@yahoogroups.com, "legolasfett <legolasfett@y...>" <legolasfett@y...> wrote:
> Not bad at all, I have had this happened to me as well, just go into
> the CV folder, then data, then into Warlords. Open the data file
> called orphans-######## (bunch of digits) and see what cards are
> listed. Just go into Card Vault and fix those cards entry (how mnay u
> have etc) and then recheck to make sure everything is ok. Atleast
> thats what I have done, and it fixed the problem

So it has to do with *my inventory*, not the data files themselves? Whew!
 
At 06:40 PM 3/4/2003 +0000, you wrote:
>OK, just downloaded v1.1. Got an error upon loading up my Warlord and L5R
>files, I got this:
>
>The following warnings occured:
>Saved filter is inconsistant with data files. U sing default.
>Saved inventory filter is inconsistnat with data files. Using default.

These warnings are caused by upgrading to v1.1. v1.1 does things in
slightly different ways to v1.0, including store the data for your filters
in slightly different ways, so when you load it for the first time it tries
to make sense of them, gives up, and starts over. It's also sometimes
caused by changes in the data files (for example, if you're filtering by a
tag group that no longer exists). Don't worry about it unless it's
happening on a regular basis.

>I also got some "orphaned" entries from my Warlord database.
>
>So how bad did I just screw up?

This isn't caused by v1.1, but is a problem caused by getting the latest
version of data files. If you add cards to your inventory, update your data
files, and get this message, some of the cards in your inventory are no
longer present in the datafiles. You might want to contact the data file
author and ask him to put the cards back. (As someone else suggested, you
can also examine the orphans file to see which cards were lost.)

So apparently none of this is your fault. Hurrah! :)


--
Colen McAlister (colen@wolflair.com)
Lone Wolf Development www.wolflair.com


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Rent DVDs Online-No late fees! Try Netflix for FREE!
http://us.click.yahoo.com/bbvVKB/oEZFAA/46VHAA/WuQolB/TM
---------------------------------------------------------------------~->
 
At 06:40 PM 3/4/2003 +0000, you wrote:
>The following warnings occured:
>Saved filter is inconsistant with data files. U sing default.
>Saved inventory filter is inconsistnat with data files. Using default.

As Colen indicated, this is to be expected. Lots of stuff has changed in
V1.1, so the old V1.0 filters won't always work. This is nothing to be
worried about.

>I also got some "orphaned" entries from my Warlord database.

Now THIS is something to generally be concerned about. It means that the
author of the data files has changed critical things between one release of
data files and another. Generally, it means that one or more cards you had
entered in your inventory have been changed by the author and are no longer
accessible in your inventory.

As mentioned in another post, the saved file you're pointed to gives you
information on the orphaned cards, so you can correct things. However, the
author of the data files also needs to be notified.

Starting with V1.1, we've included a new tool for authors that should
ensure these sorts of mistakes don't occur (assuming they use it, of course).

The reason this error showed up when you upgraded to V1.1 is that the new
version does a thorough job of checking for these events and reporting them
to you - V1.0 did not do this. The error itself is due to a change in the
data files introduced at some point in the past by the data file author.
But V1.1 is just now detecting and reporting it to you.

>So how bad did I just screw up?

As mentioned previously, you didn't mess up anything. Simply check the
"orphans" file and verify that all the orphaned cards are updated correctly
within your inventory. And make sure to tell the author about the problem
so that he can make sure it doesn't happen in the future - include the
orphans file so that he's got concrete data about where the problem lies
within the data files.

Hope this helps,
Rob

---------------------------------------------------------------------------
Rob Bowes (rob@wolflair.com) (559) 658-6995
Lone Wolf Development www.wolflair.com


------------------------ Yahoo! Groups Sponsor ---------------------~-->
New Yahoo! Mail Plus. More flexibility. More control. More power.
Get POP access, more storage, more filters, and more.
http://us.click.yahoo.com/Hcb0iA/P.iFAA/46VHAA/WuQolB/TM
---------------------------------------------------------------------~->
 
--- Rob Bowes <rob@wolflair.com> wrote:
> >I also got some "orphaned" entries from my Warlord database.
>
> Now THIS is something to generally be concerned about. It means that the
> author of the data files has changed critical things between one release of
> data files and another. Generally, it means that one or more cards you had
> entered in your inventory have been changed by the author and are no longer
> accessible in your inventory.

Off hand, I don't know what... can you send me the list of orphaned entries?

The only changes I made was to add the new set. I have not changed any card ID
values in the other card sets... at least, not on purpose.

> As mentioned in another post, the saved file you're pointed to gives you
> information on the orphaned cards, so you can correct things. However, the
> author of the data files also needs to be notified.

Please send me the data!

> Starting with V1.1, we've included a new tool for authors that should
> ensure these sorts of mistakes don't occur (assuming they use it, of course).

I ran it. It did not point to any problems.

Did you add any cards yourself?

> The reason this error showed up when you upgraded to V1.1 is that the new
> version does a thorough job of checking for these events and reporting them
> to you - V1.0 did not do this. The error itself is due to a change in the
> data files introduced at some point in the past by the data file author.
> But V1.1 is just now detecting and reporting it to you.

So, this could have been from a very early incarnation of the data files? That
is a different story, but I will know more when I get the orphan data.

> As mentioned previously, you didn't mess up anything. Simply check the
> "orphans" file and verify that all the orphaned cards are updated correctly
> within your inventory. And make sure to tell the author about the problem
> so that he can make sure it doesn't happen in the future - include the
> orphans file so that he's got concrete data about where the problem lies
> within the data files.

Send it to me, at kuni_tetsu@yahoo.com


=====
---

Kuni Tetsu
Clan War rules guy
Moderator of ClanWar-l

__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, more
http://taxes.yahoo.com/
 
At 08:00 PM 3/4/2003 -0800, you wrote:
> > Starting with V1.1, we've included a new tool for authors that should
> > ensure these sorts of mistakes don't occur (assuming they use it, of
> course).
>
>I ran it. It did not point to any problems.
>
> > The reason this error showed up when you upgraded to V1.1 is that the new
> > version does a thorough job of checking for these events and reporting
> them
> > to you - V1.0 did not do this. The error itself is due to a change in the
> > data files introduced at some point in the past by the data file author.
> > But V1.1 is just now detecting and reporting it to you.
>
>So, this could have been from a very early incarnation of the data files? That
>is a different story, but I will know more when I get the orphan data.

This could be an ancient issue that arose way back, even between the V1.0
and V1.1 versions of the Warlords files. If so, the error has been
lingering on the user's system and there's been no report of it until now.
So the last set of data files may be rock solid in this regard, but the
error crept in a long time back.

When you get the orphan data, please let me know if it's something recent
or ancient. It's also conceivable that CV is reporting something wrong, in
which case I need to known what happened so I can get it fixed. :-)

Thanks, Rob

---------------------------------------------------------------------------
Rob Bowes (rob@wolflair.com) (559) 658-6995
Lone Wolf Development www.wolflair.com
 
You must log in or register to reply here.
Back
Top