• Please note: In an effort to ensure that all of our users feel welcome on our forums, we’ve updated our forum rules. You can review the updated rules here: http://forums.wolflair.com/showthread.php?t=5528.

    If a fellow Community member is not following the forum rules, please report the post by clicking the Report button (the red yield sign on the left) located on every post. This will notify the moderators directly. If you have any questions about these new rules, please contact support@wolflair.com.

    - The Lone Wolf Development Team

"Item" question.

  • Thread starter Thread starter pr0fane at sympatico.ca
  • Start date Start date
P

pr0fane at sympatico.ca

Guest
Hello again.

I must be a dunderhead. I can easily do 2/3 of what has been described to
me, but that final third has me stumped.

Since the item is exceptional, Colen's second suggestion is most
appropriate.

1. you can have the item assign a type "2Slots" or similar.
--no problem, done.

2.Give all units that can take that item an option which, if the unit has
type "x1Slot",
--in this step, it's the "if" that I just cannot resolve. I see no
conditional attributes for Options.

3. reduces the number of special items allowed by 1 ("item:-1").
--easy enough, done.

Please help...I'm stuck.
________
--Pr0fane
--Official Dark Age datafiles Maintainer

-----Original Message-----
From: Colen McAlister [mailto:colen@wolflair.com]
Sent: May 30, 2003 3:16 AM
To: ab@support.wolflair.com
Subject: Re: [AB] "Item" question.



At 02:44 AM 5/30/2003 +0000, you wrote:
>Hmm...I don't know what happened...I sent this Q as an email but it
>seems to have gone nowhere...sorry if it gets doubled.
>
>G'day everybody.
>
>I have what seems to me to be a simple problem, but I cannot find a
>means to implement.
>
>What I need is this - I need an Item to count as 2 Items if selected.
>
>Sounds so simple that I don't think I need to elaborate...maybe I'm
>just blind and cannot see how this can be done.

You can do this one of two ways; either change the item category in the
definition file so that each item in that category takes up 2 slots or, if
this is only true for a single item, you can have the item assign a type
"x1Slot" or similar. Give all units that can take that item an option
which, if the unit has tyle "x1Slot", reduces the number of special items
allowed by 1 ("item:-1".

Hope this helps,


--
Colen McAlister (colen@wolflair.com)
Lone Wolf Development
www.wolflair.com



Yahoo! Groups Sponsor
ADVERTISEMENT




To unsubscribe from this group, email

armybuilder-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


[Non-text portions of this message have been removed]


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges at Myinks.com - Save 80%. Quality inkjet cartridges &
refill kits! FREE s/h on $50 orders to the US & Canada. Fast shipping.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/hwZBYB/zoVGAA/ySSFAA/IMSolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, email

armybuilder-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
 
At 12:03 AM 7/9/2003 -0400, you wrote:
>Hello again.
>
>I must be a dunderhead. I can easily do 2/3 of what has been described to
>me, but that final third has me stumped.
>
>Since the item is exceptional, Colen's second suggestion is most
>appropriate.
>
>1. you can have the item assign a type "2Slots" or similar.
>--no problem, done.
>
>2.Give all units that can take that item an option which, if the unit has
>type "x1Slot",
>--in this step, it's the "if" that I just cannot resolve. I see no
>conditional attributes for Options.

By this, an option with the attribute 'utyp:x1Slot' is meant. You're right
in that there's no way to make an individual attribute of an option behave
differently depending on whether a type is defined or not, but you can make
the option as a whole valid or invalid. If the type 'x1Slot' is present,
the option will appear; otherwise, it will be as if it was never made.

Sorry for the confusion; sometimes you have to think in a certain way to
work these things out. :)

--
Colen McAlister (colen@wolflair.com)
Lone Wolf Development www.wolflair.com


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges at Myinks.com - Save 80%. Quality inkjet cartridges &
refill kits! FREE s/h on $50 orders to the US & Canada. Fast shipping.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/hwZBYB/zoVGAA/ySSFAA/IMSolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, email

armybuilder-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
 
--- In armybuilder@yahoogroups.com, "Pr0fane" <pr0fane@s...> wrote:
> 1. you can have the item assign a type "2Slots" or similar.
> --no problem, done.
>
> 2.Give all units that can take that item an option which, if the
> unit has type "x1Slot",
> --in this step, it's the "if" that I just cannot resolve. I see no
> conditional attributes for Options.

Option attribute on the same option that does the item:-1
utyp:2Slots (if that is the type you used above)

Cheers,
Russell.
--
Russell Sparkes, rjs@inorbit.com, http://www24.brinkster.com/rjsoz
"Experience is what you get just after you needed it" - Unknown


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges at Myinks.com - Save 80%. Quality inkjet cartridges &
refill kits! FREE s/h on $50 orders to the US & Canada. Fast shipping.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/hwZBYB/zoVGAA/ySSFAA/IMSolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, email

armybuilder-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
 
You must log in or register to reply here.
Back
Top