• Please note: In an effort to ensure that all of our users feel welcome on our forums, we’ve updated our forum rules. You can review the updated rules here: http://forums.wolflair.com/showthread.php?t=5528.

    If a fellow Community member is not following the forum rules, please report the post by clicking the Report button (the red yield sign on the left) located on every post. This will notify the moderators directly. If you have any questions about these new rules, please contact support@wolflair.com.

    - The Lone Wolf Development Team

Comp rule question.

  • Thread starter Thread starter mobo at adelphia.net
  • Start date Start date
M

mobo at adelphia.net

Guest
Hello, Here's a little back ground info:

There are two comp groups, A and B. Your army must have 2-4 units from comp A. Your army may have up to one unit from comp B. For each unit form comp A your can have one unit from any where in the army list. This could be another unit form comp B.

The question:

How do I get AB to only allow 0-1 unit from comp B and up to three more units form comp be when a matching number of units are from comp A? I don't want the user to be able to just select 4 units form comp B with out having the right amounts of units form comp A.

There is what I am currently using for a comp rule:

HQ:umin=1,Cmbt:umin=2&umax=4,Sprt:umin=0&umax=1,Divl:urelu<=Cmbt

As you can see, it meets the first half of my comp rule but does not allow for the extra units form comp B due to there being "x" number of units form comp A.

Hope this makes some since.


Thanks,

Keith




[Non-text portions of this message have been removed]


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Stock for $4
and no minimums.
FREE Money 2002.
http://us.click.yahoo.com/orkH0C/n97DAA/Ey.GAA/IMSolB/TM
---------------------------------------------------------------------~->
 
Best I can think of right now is the acmp option attribute. Have the
user select an option on each unit of A, that allows another unit of B
(maybe use types to keep them from adding it to the first unit of A -
I'm not quite sure how you could do that, unless no units of B were
allowed at the beginning (since you nee 2-4 A anyway))

Mathias Gehl
mgehl@cox.net


-----Original Message-----
From: Keith [mailto:mobo@adelphia.net]
Sent: Friday, May 24, 2002 5:39 AM
To: ab@support.wolflair.com
Subject: [AB] Comp rule question.

Hello, Here's a little back ground info:

There are two comp groups, A and B. Your army must have 2-4 units from
comp A. Your army may have up to one unit from comp B. For each unit
form comp A your can have one unit from any where in the army list.
This could be another unit form comp B.

The question:

How do I get AB to only allow 0-1 unit from comp B and up to three more
units form comp be when a matching number of units are from comp A? I
don't want the user to be able to just select 4 units form comp B with
out having the right amounts of units form comp A.

There is what I am currently using for a comp rule:

HQ:umin=1,Cmbt:umin=2&umax=4,Sprt:umin=0&umax=1,Divl:urelu<=Cmbt

As you can see, it meets the first half of my comp rule but does not
allow for the extra units form comp B due to there being "x" number of
units form comp A.

Hope this makes some since.


Thanks,

Keith




[Non-text portions of this message have been removed]



To unsubscribe from this group, email

armybuilder-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/





------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Stock for $4
and no minimums.
FREE Money 2002.
http://us.click.yahoo.com/orkH0C/n97DAA/Ey.GAA/IMSolB/TM
---------------------------------------------------------------------~->
 
Just realized - start by not allowing B, and on each unit of A, have a
hidden, auto-selected option that uses acmp to add an allowed unit of B.
I think B will still show up in the available units list as long as it's
mentioned in the composition rules (perhaps umax=0 is the only
composition rule you need).

Mathias Gehl
mgehl@cox.net


-----Original Message-----
From: Keith [mailto:mobo@adelphia.net]
Sent: Friday, May 24, 2002 5:39 AM
To: ab@support.wolflair.com
Subject: [AB] Comp rule question.

Hello, Here's a little back ground info:

There are two comp groups, A and B. Your army must have 2-4 units from
comp A. Your army may have up to one unit from comp B. For each unit
form comp A your can have one unit from any where in the army list.
This could be another unit form comp B.

The question:

How do I get AB to only allow 0-1 unit from comp B and up to three more
units form comp be when a matching number of units are from comp A? I
don't want the user to be able to just select 4 units form comp B with
out having the right amounts of units form comp A.

There is what I am currently using for a comp rule:

HQ:umin=1,Cmbt:umin=2&umax=4,Sprt:umin=0&umax=1,Divl:urelu<=Cmbt

As you can see, it meets the first half of my comp rule but does not
allow for the extra units form comp B due to there being "x" number of
units form comp A.

Hope this makes some since.


Thanks,

Keith




[Non-text portions of this message have been removed]



To unsubscribe from this group, email

armybuilder-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/





------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Stock for $4
and no minimums.
FREE Money 2002.
http://us.click.yahoo.com/orkH0C/n97DAA/Ey.GAA/IMSolB/TM
---------------------------------------------------------------------~->
 
Mathias, thanks for the help. The attribute allw is actually what I need. Good thinking about making it a hidden option!


Thanks,

Keith


----- Original Message -----
From: Mathias Gehl
To: armybuilder@yahoogroups.com
Sent: Friday, May 24, 2002 10:32 AM
Subject: RE: [AB] Comp rule question.


Just realized - start by not allowing B, and on each unit of A, have a
hidden, auto-selected option that uses acmp to add an allowed unit of B.
I think B will still show up in the available units list as long as it's
mentioned in the composition rules (perhaps umax=0 is the only
composition rule you need).

Mathias Gehl
mgehl@cox.net


-----Original Message-----
From: Keith [mailto:mobo@adelphia.net]
Sent: Friday, May 24, 2002 5:39 AM
To: armybuilder@yahoogroups.com
Subject: [AB] Comp rule question.

Hello, Here's a little back ground info:

There are two comp groups, A and B. Your army must have 2-4 units from
comp A. Your army may have up to one unit from comp B. For each unit
form comp A your can have one unit from any where in the army list.
This could be another unit form comp B.

The question:

How do I get AB to only allow 0-1 unit from comp B and up to three more
units form comp be when a matching number of units are from comp A? I
don't want the user to be able to just select 4 units form comp B with
out having the right amounts of units form comp A.

There is what I am currently using for a comp rule:

HQ:umin=1,Cmbt:umin=2&umax=4,Sprt:umin=0&umax=1,Divl:urelu<=Cmbt

As you can see, it meets the first half of my comp rule but does not
allow for the extra units form comp B due to there being "x" number of
units form comp A.

Hope this makes some since.


Thanks,

Keith




[Non-text portions of this message have been removed]



To unsubscribe from this group, email

armybuilder-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/





Yahoo! Groups Sponsor
ADVERTISEMENT




To unsubscribe from this group, email

armybuilder-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor ---------------------~-->
FREE COLLEGE MONEY
CLICK HERE to search
600,000 scholarships!
http://us.click.yahoo.com/DlIU9C/4m7CAA/Ey.GAA/IMSolB/TM
---------------------------------------------------------------------~->
 
You must log in or register to reply here.
Back
Top