A
armybuilder at yahoogroup
Guest
To unsubscribe from this group, email
armybuilder-unsubscribe@egroups.com
------------------------------------------------------------------------
There are 6 messages in this issue.
Topics in this digest:
1. Re: Available Unit column
From: "Pete" <pete@wargamesdirectory.com>
2. Setting Limits
From: "Pete" <pete@wargamesdirectory.com>
3. Re: Setting Limits
From: ImhotepTheArchitect <imhotepthearchitect@yahoo.com>
4. Re: Available Unit column
From: Colen McAlister <colen@wolflair.com>
5. Re: Setting Limits
From: "Pete" <pete@wargamesdirectory.com>
6. Re: Setting Limits
From: ImhotepTheArchitect <imhotepthearchitect@yahoo.com>
________________________________________________________________________
________________________________________________________________________
Message: 1
Date: Thu, 21 Nov 2002 13:09:42 -0000
From: "Pete" <pete@wargamesdirectory.com>
Subject: Re: Available Unit column
> Edit the definition file to reduce the space given to the game stats; this
> should increase the amount of 'unused' space that gets used for the name.
> If you can't edit the definition file (if, for example, you're adding
stuff
> to someone elses datafiles), then I'm afraid you're out of luck.
Well I just tried this and only had a single stat and got rid of the options
column, but both the Available Unit and Unit Name columns remained where
they were. Unfortunately this prevents long unit names from displaying
properly.
Pete
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.419 / Virus Database: 235 - Release Date: 13/11/2002
________________________________________________________________________
________________________________________________________________________
Message: 2
Date: Thu, 21 Nov 2002 18:40:11 -0000
From: "Pete" <pete@wargamesdirectory.com>
Subject: Setting Limits
Hi
Can anyone help me with the following:
1) is it possible to set a max on two or more units, so that, for
instance, there can be 3 units in total made from a combination of 2
different units?
2) can I set a max on two units where only one unit can be selected
in an army? Eg: there is a max of 3 units but this can be either unit
1 or unit 2 but not a mix of both?
Thanks!
Pete
________________________________________________________________________
________________________________________________________________________
Message: 3
Date: Thu, 21 Nov 2002 13:11:31 -0800 (PST)
From: ImhotepTheArchitect <imhotepthearchitect@yahoo.com>
Subject: Re: Setting Limits
Try using type and the trat race attribute.
Pete <pete@wargamesdirectory.com> wrote:Hi
Can anyone help me with the following:
1) is it possible to set a max on two or more units, so that, for
instance, there can be 3 units in total made from a combination of 2
different units?
2) can I set a max on two units where only one unit can be selected
in an army? Eg: there is a max of 3 units but this can be either unit
1 or unit 2 but not a mix of both?
--
Graham H. Tracey (40k3 Maintainer)
If we can't fix it, then it ain't broke!
40k3 Datafile Support Group: http://groups.yahoo.com/group/ab-40k3
40k3 Datafiles Bug Tracker: http://bugtrack.lscfn.ca
---------------------------------
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 4
Date: Thu, 21 Nov 2002 15:50:41 -0800
From: Colen McAlister <colen@wolflair.com>
Subject: Re: Available Unit column
At 01:09 PM 11/21/2002 +0000, you wrote:
> > Edit the definition file to reduce the space given to the game stats; this
> > should increase the amount of 'unused' space that gets used for the name.
> > If you can't edit the definition file (if, for example, you're adding
>stuff
> > to someone elses datafiles), then I'm afraid you're out of luck.
>
>Well I just tried this and only had a single stat and got rid of the options
>column, but both the Available Unit and Unit Name columns remained where
>they were. Unfortunately this prevents long unit names from displaying
>properly.
The size of the name doesn't increase much, but it does increase a bit (and
of course there's more space if you're running at a higher resolution) when
you decrease the amount of space the stats take up. What sort of names are
you having problems with? I know the Babylon 5 Wars files have Issues with
ship names being too long at 800x600, but once you get up to 1024x768 or
higher they're fine.
--
Colen McAlister (colen@wolflair.com)
Lone Wolf Development www.wolflair.com
________________________________________________________________________
________________________________________________________________________
Message: 5
Date: Thu, 21 Nov 2002 22:31:30 -0000
From: "Pete" <pete@wargamesdirectory.com>
Subject: Re: Setting Limits
Thanks - I'm using this syntax:
tlmt:rec-unit=2@max
To restrict the type 'rec' to 2 per 1000pts but it only objects to 2 of the
same unit rather that 2 of the same type (ie: I have four units within the
rec type category) - any ideas?
Pete
----- Original Message -----
From: "ImhotepTheArchitect" <imhotepthearchitect@yahoo.com>
To: ab@support.wolflair.com
Sent: Thursday, November 21, 2002 9:11 PM
Subject: Re: [AB] Setting Limits
>
> Try using type and the trat race attribute.
>
> Pete <pete@wargamesdirectory.com> wrote:Hi
>
> Can anyone help me with the following:
>
> 1) is it possible to set a max on two or more units, so that, for
> instance, there can be 3 units in total made from a combination of 2
> different units?
>
> 2) can I set a max on two units where only one unit can be selected
> in an army? Eg: there is a max of 3 units but this can be either unit
> 1 or unit 2 but not a mix of both?
>
>
> --
> Graham H. Tracey (40k3 Maintainer)
> If we can't fix it, then it ain't broke!
> 40k3 Datafile Support Group: http://groups.yahoo.com/group/ab-40k3
> 40k3 Datafiles Bug Tracker: http://bugtrack.lscfn.ca
>
>
>
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now
>
> [Non-text portions of this message have been removed]
>
>
> To unsubscribe from this group, email
>
> armybuilder-unsubscribe@egroups.com
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.419 / Virus Database: 235 - Release Date: 13/11/2002
________________________________________________________________________
________________________________________________________________________
Message: 6
Date: Thu, 21 Nov 2002 17:48:36 -0800 (PST)
From: ImhotepTheArchitect <imhotepthearchitect@yahoo.com>
Subject: Re: Setting Limits
Hmmmm sorry abouty that... try this
ulmt:type=Rec-max@unit=2
Pete <pete@wargamesdirectory.com> wrote:Thanks - I'm using this syntax:
tlmt:rec-unit=2@max
To restrict the type 'rec' to 2 per 1000pts but it only objects to 2 of the
same unit rather that 2 of the same type (ie: I have four units within the
rec type category) - any ideas?
Pete
--
Graham H. Tracey (40k3 Maintainer)
If we can't fix it, then it ain't broke!
40k3 Datafile Support Group: http://groups.yahoo.com/group/ab-40k3
40k3 Datafiles Bug Tracker: http://bugtrack.lscfn.ca
---------------------------------
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
armybuilder-unsubscribe@egroups.com
------------------------------------------------------------------------
There are 6 messages in this issue.
Topics in this digest:
1. Re: Available Unit column
From: "Pete" <pete@wargamesdirectory.com>
2. Setting Limits
From: "Pete" <pete@wargamesdirectory.com>
3. Re: Setting Limits
From: ImhotepTheArchitect <imhotepthearchitect@yahoo.com>
4. Re: Available Unit column
From: Colen McAlister <colen@wolflair.com>
5. Re: Setting Limits
From: "Pete" <pete@wargamesdirectory.com>
6. Re: Setting Limits
From: ImhotepTheArchitect <imhotepthearchitect@yahoo.com>
________________________________________________________________________
________________________________________________________________________
Message: 1
Date: Thu, 21 Nov 2002 13:09:42 -0000
From: "Pete" <pete@wargamesdirectory.com>
Subject: Re: Available Unit column
> Edit the definition file to reduce the space given to the game stats; this
> should increase the amount of 'unused' space that gets used for the name.
> If you can't edit the definition file (if, for example, you're adding
stuff
> to someone elses datafiles), then I'm afraid you're out of luck.
Well I just tried this and only had a single stat and got rid of the options
column, but both the Available Unit and Unit Name columns remained where
they were. Unfortunately this prevents long unit names from displaying
properly.
Pete
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.419 / Virus Database: 235 - Release Date: 13/11/2002
________________________________________________________________________
________________________________________________________________________
Message: 2
Date: Thu, 21 Nov 2002 18:40:11 -0000
From: "Pete" <pete@wargamesdirectory.com>
Subject: Setting Limits
Hi
Can anyone help me with the following:
1) is it possible to set a max on two or more units, so that, for
instance, there can be 3 units in total made from a combination of 2
different units?
2) can I set a max on two units where only one unit can be selected
in an army? Eg: there is a max of 3 units but this can be either unit
1 or unit 2 but not a mix of both?
Thanks!
Pete
________________________________________________________________________
________________________________________________________________________
Message: 3
Date: Thu, 21 Nov 2002 13:11:31 -0800 (PST)
From: ImhotepTheArchitect <imhotepthearchitect@yahoo.com>
Subject: Re: Setting Limits
Try using type and the trat race attribute.
Pete <pete@wargamesdirectory.com> wrote:Hi
Can anyone help me with the following:
1) is it possible to set a max on two or more units, so that, for
instance, there can be 3 units in total made from a combination of 2
different units?
2) can I set a max on two units where only one unit can be selected
in an army? Eg: there is a max of 3 units but this can be either unit
1 or unit 2 but not a mix of both?
--
Graham H. Tracey (40k3 Maintainer)
If we can't fix it, then it ain't broke!
40k3 Datafile Support Group: http://groups.yahoo.com/group/ab-40k3
40k3 Datafiles Bug Tracker: http://bugtrack.lscfn.ca
---------------------------------
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 4
Date: Thu, 21 Nov 2002 15:50:41 -0800
From: Colen McAlister <colen@wolflair.com>
Subject: Re: Available Unit column
At 01:09 PM 11/21/2002 +0000, you wrote:
> > Edit the definition file to reduce the space given to the game stats; this
> > should increase the amount of 'unused' space that gets used for the name.
> > If you can't edit the definition file (if, for example, you're adding
>stuff
> > to someone elses datafiles), then I'm afraid you're out of luck.
>
>Well I just tried this and only had a single stat and got rid of the options
>column, but both the Available Unit and Unit Name columns remained where
>they were. Unfortunately this prevents long unit names from displaying
>properly.
The size of the name doesn't increase much, but it does increase a bit (and
of course there's more space if you're running at a higher resolution) when
you decrease the amount of space the stats take up. What sort of names are
you having problems with? I know the Babylon 5 Wars files have Issues with
ship names being too long at 800x600, but once you get up to 1024x768 or
higher they're fine.
--
Colen McAlister (colen@wolflair.com)
Lone Wolf Development www.wolflair.com
________________________________________________________________________
________________________________________________________________________
Message: 5
Date: Thu, 21 Nov 2002 22:31:30 -0000
From: "Pete" <pete@wargamesdirectory.com>
Subject: Re: Setting Limits
Thanks - I'm using this syntax:
tlmt:rec-unit=2@max
To restrict the type 'rec' to 2 per 1000pts but it only objects to 2 of the
same unit rather that 2 of the same type (ie: I have four units within the
rec type category) - any ideas?
Pete
----- Original Message -----
From: "ImhotepTheArchitect" <imhotepthearchitect@yahoo.com>
To: ab@support.wolflair.com
Sent: Thursday, November 21, 2002 9:11 PM
Subject: Re: [AB] Setting Limits
>
> Try using type and the trat race attribute.
>
> Pete <pete@wargamesdirectory.com> wrote:Hi
>
> Can anyone help me with the following:
>
> 1) is it possible to set a max on two or more units, so that, for
> instance, there can be 3 units in total made from a combination of 2
> different units?
>
> 2) can I set a max on two units where only one unit can be selected
> in an army? Eg: there is a max of 3 units but this can be either unit
> 1 or unit 2 but not a mix of both?
>
>
> --
> Graham H. Tracey (40k3 Maintainer)
> If we can't fix it, then it ain't broke!
> 40k3 Datafile Support Group: http://groups.yahoo.com/group/ab-40k3
> 40k3 Datafiles Bug Tracker: http://bugtrack.lscfn.ca
>
>
>
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now
>
> [Non-text portions of this message have been removed]
>
>
> To unsubscribe from this group, email
>
> armybuilder-unsubscribe@egroups.com
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.419 / Virus Database: 235 - Release Date: 13/11/2002
________________________________________________________________________
________________________________________________________________________
Message: 6
Date: Thu, 21 Nov 2002 17:48:36 -0800 (PST)
From: ImhotepTheArchitect <imhotepthearchitect@yahoo.com>
Subject: Re: Setting Limits
Hmmmm sorry abouty that... try this
ulmt:type=Rec-max@unit=2
Pete <pete@wargamesdirectory.com> wrote:Thanks - I'm using this syntax:
tlmt:rec-unit=2@max
To restrict the type 'rec' to 2 per 1000pts but it only objects to 2 of the
same unit rather that 2 of the same type (ie: I have four units within the
rec type category) - any ideas?
Pete
--
Graham H. Tracey (40k3 Maintainer)
If we can't fix it, then it ain't broke!
40k3 Datafile Support Group: http://groups.yahoo.com/group/ab-40k3
40k3 Datafiles Bug Tracker: http://bugtrack.lscfn.ca
---------------------------------
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/