-
Please note: In an effort to ensure that all of our users feel welcome on our forums, we’ve updated our forum rules. You can review the updated rules here: http://forums.wolflair.com/showthread.php?t=5528.
If a fellow Community member is not following the forum rules, please report the post by clicking the Report button (the red yield sign on the left) located on every post. This will notify the moderators directly. If you have any questions about these new rules, please contact support@wolflair.com.
- The Lone Wolf Development Team
Army Builder 3.3a released
- Thread starter Colen
- Start date
wuffingas saxon
New member
Just a tip; If you run AVG remember to turn it off! Advice from the numpty who forgot!
3.3a did not install when first attempted.
Error message was " Internal error: Failed to expand shell folder constant "userdocs". "
I have a networked laptop but was not connected to the network at the time. Connecting to the network only partially helped.
I figured out that My Documents was referring to a folder on a network drive version of My Documents (called H: ) and, when not connected to the network, 3.3a could not install because the H: drive was not available. I found that one must right click on My Documents and restore the default to the C drive under Documents and Settings. Then 3.3a installed properly and worked. This is probably a peculiar issue to my corporate network which does an auto-sync between my laptop and a network folder on a network hard drive whenever I shut down when connected to the network.
Error message was " Internal error: Failed to expand shell folder constant "userdocs". "
I have a networked laptop but was not connected to the network at the time. Connecting to the network only partially helped.
I figured out that My Documents was referring to a folder on a network drive version of My Documents (called H: ) and, when not connected to the network, 3.3a could not install because the H: drive was not available. I found that one must right click on My Documents and restore the default to the C drive under Documents and Settings. Then 3.3a installed properly and worked. This is probably a peculiar issue to my corporate network which does an auto-sync between my laptop and a network folder on a network hard drive whenever I shut down when connected to the network.
Last edited:
The "userdocs" error message indicates that our installer couldn't find your "My Documents" folder. Your network situation explains it, I assume - we assume that a "My Documents" folder will be present, since we need somewhere to store our Army Builder user files. If that isn't there, there's not a lot we can do.
Glad you got Army Builder working in the end
Glad you got Army Builder working in the end
Hi,
I have a big problem, after update to 3.3a version of AB it stop working, it doesn't start. There is written this:
ArmyBuilder.exe has encountered an error and needs to close.
Please email a DESCRIPTION OF WHAT YOU WERE DOING, in as much detail as possible, along with this message, to support@wolflair.com. PLEASE NOTE: Unless you tell us what you were doing, we won't have enough information to fix this problem!
Right click and choose "Copy to Clipboard" to copy these details:
C:\Program Files (x86)\Army Builder\ArmyBuilder.exe
3.3a 237
ACCESS VIOLATION
Address: 0x005a420c
Type: bad read
major: 6, minor: 1, build: 7600, platform: 2, version: , spmaj: 0, spmin: 0, suitemask: 00000100, type: 1
Or you can find them here:
C:\Users\PAWE~1\AppData\Local\Temp\lwderror4428.txt
Help me please...
I have a big problem, after update to 3.3a version of AB it stop working, it doesn't start. There is written this:
ArmyBuilder.exe has encountered an error and needs to close.
Please email a DESCRIPTION OF WHAT YOU WERE DOING, in as much detail as possible, along with this message, to support@wolflair.com. PLEASE NOTE: Unless you tell us what you were doing, we won't have enough information to fix this problem!
Right click and choose "Copy to Clipboard" to copy these details:
C:\Program Files (x86)\Army Builder\ArmyBuilder.exe
3.3a 237
ACCESS VIOLATION
Address: 0x005a420c
Type: bad read
major: 6, minor: 1, build: 7600, platform: 2, version: , spmaj: 0, spmin: 0, suitemask: 00000100, type: 1
Or you can find them here:
C:\Users\PAWE~1\AppData\Local\Temp\lwderror4428.txt
Help me please...
Hi sirpawel,
Please email support@wolflair.com with a description of your issue, and we'll get you sorted out.
Please email support@wolflair.com with a description of your issue, and we'll get you sorted out.