Unit Size Determines Upper Range Attrib?

[Decurion]

I have a unit that I need to allow 50% to take a specific option (e.g. 50% of the unit may take bows).

I found some old posts from 2003, but they were using AB 2 (I think).

Any suggestions on how to do this?

Tim

[Garfunkel]

Hello,

1. Create a unitstat with is set to #/2 by script.
2. Create an exclusion group limited by a @unitstat.
3. Each option you need to be limited uses 1 on this exclusion group

Or

1. Create an exclusion group limited by #
2. Each option uses 2 on this exclusion group.

Note the second solution is easyer to implement, but it round down your division by 2.

If you need details on the implementation, just ask

Hope that help.

Frédéric

[Decurion]

Frédéric,

Thanks much! I used the second option and it works great.

Thank you again.

Tim

Originally Posted by Garfunkel

Hello,

1. Create a unitstat with is set to #/2 by script.
2. Create an exclusion group limited by a @unitstat.
3. Each option you need to be limited uses 1 on this exclusion group

Or

1. Create an exclusion group limited by #
2. Each option uses 2 on this exclusion group.

Note the second solution is easyer to implement, but it round down your division by 2.

If you need details on the implementation, just ask

Hope that help.

Frédéric