Member
Join Date: Jun 2011
Posts: 32
|
Thought I posted this before, but is there a way to open an existing .por and apply default configuration to the hero? Recent purchase of modules, etc. and as a GM also sync between different players settings with a master.
It can get really frustrating trying to go through all these tick boxes 1x1. |
#1 |
Senior Member
Join Date: Sep 2013
Location: Vancouver, Canada.
Posts: 818
|
Control K to open the options.
Check the boxes you want, or if you're happy check and uncheck (or the reverse) to get the "Change Settings" dialogue to come up. Top is OK, which accepts and closes. Next is Cancel, which doesn't save changes. Next is Use Default. Next is Set Default. These last two are what you're interested in. Check all the boxes (and uncheck any as well) until you're happy with whatever. Then hit "Set Default". That is now saved. When you open anything, you can Control + K, then check/uncheck (or uncheck/re-check) any option which has the Change Settings dialogue again. Then hit "Use Default", which you have previously saved. |
#2 |
Member
Join Date: Jun 2011
Posts: 32
|
Thank You... actually found it about 5 minutes ago, but this confirmation is reassuring.
|
#3 |
|
|