TAU Missing entries and a lack of function in AB 3.0b

wolkenmann · September 13th, 2005, 01:10 AM

Hi there.
I just owned the Army-Builder 3.0b and while planning a roster for W40K TAU i recognized, that there's no entry for the TAU "Piranha".
That wouldn't be that bad for in vers. 2.2c there had been the possibility to fill in a blank entry with free points.
But in Vers. 3.0b i'm missing hard such an entry and i searched each part of the Software therefor.

If this feature was already integrated in AB3.0b, please could anyone tell me where to find it.
In order of the possibilty any rules could change and any troop or character gets new wargear or equipment i have to wait for the developers to update the datafiles.
This lack should be fixed.
What do you think about ?

With best regards.
Matthias Venghaus
m.venghaus@ckv-ravensburg.de
- Germany -

Sorry for my rusty english - it's been a while since i had learned it in school.

wolkenmann · September 15th, 2005, 05:07 AM

Uhhmmmm, is there anybody out there ?! :wink:

Could those points be fixed with the next file update ??

wolkenmann · October 4th, 2005, 01:55 AM

If there is any help needed in completing the new entries due to the IA III ( the Taros campaign ), just ask me, cause i've bought the book.
So if there are missing rules, just write a brief email.
Greetz
Wolkenmann

KwiKwag · October 4th, 2005, 01:36 PM

I am not sure why they dont answer you. They do have another website that they used before this one and they just may answer you there. Here is the link

http://ab40k3.homelinux.net/modules....viewforum&f=20

Good luck.

wolkenmann · October 7th, 2005, 12:31 AM

Oh, thanks for this message.
I'll check out the link and place the question over there, too.
Thanks for your help again.

HappyTau · December 27th, 2005, 08:52 AM

How do I design a unit from the ground up?
>
> I want to add forgeworld Tau units from their imperial armor book
> Three: Taros Campaign.
>
> In the Army Builder ver 2 I used the other unit option and just
> added my text and point cost.
>
> I am still searching the user manual.

shaggai · December 27th, 2005, 10:04 PM

All you should have to do is enable IA rules once you start a Tau Roster. You do this by pressing on the little "Clipboard" icon. You can also do it once you start a roster by pressing the same clipboard icon. The section that you want is "Roster Options" and then click on the "Imperial Armour" checkbox.

And, BTW posting on the "homesite" will probably give you a quicker response since a lot of people frequent it. Not so many do so here as frequently unless we're trying to get a problem solved by LW...

wolkenmann Junior Member Join Date: Sep 2005 Posts: 10 September 15th, 2005, 05:07 AM	Uhhmmmm, is there anybody out there ?! :wink: Could those points be fixed with the next file update ??
#2

KwiKwag Junior Member Join Date: Sep 2005 Posts: 10 October 4th, 2005, 01:36 PM	I am not sure why they dont answer you. They do have another website that they used before this one and they just may answer you there. Here is the link http://ab40k3.homelinux.net/modules....viewforum&f=20 Good luck.
#4

HappyTau Junior Member Join Date: Dec 2005 Posts: 3 December 27th, 2005, 08:52 AM	How do I design a unit from the ground up? > > I want to add forgeworld Tau units from their imperial armor book > Three: Taros Campaign. > > In the Army Builder ver 2 I used the other unit option and just > added my text and point cost. > > I am still searching the user manual.
#6