Senior Member
Lone Wolf Staff
Join Date: May 2005
Posts: 8,232
|
Hi Luke,
Neither Colen nor I could reproduce it on our systems, but we finally managed to reproduce it on a test machine. After some experimenting, we have an idea of what might be going wrong and a possible work-around. Try going to the Settings menu, pick the Deck Construction Settings submenu, then ENABLE the Allow Cards to Have Counts of Zero option. This solved the problem for us on the test system. We're going to figure out why this problem is actually occurring and get it fixed in a V1.3a update. In the meantime, please try the above work-around and let us know if it works for you. Thanks, Rob At 05:17 PM 10/14/2003 -0700, you wrote: >Rob, > >I'm on Windows 2000, Service Pack 4. > >Physical Hardware as Follows: > >Dell Inspiron 2600 Laptop >Pentium 3, 1.13 GHz >512M Ram >20Gig HD >CD/DVD Combo Drive (NOT a Writer) >100bT Lan, behind the router for my private network >Wireless NIC (Dell 1150 Truemobile card), Outside the router for net >access. > >That's probably about everything you'd need, I'd imagine. If anything >else helps, let me know. > >-Luke --------------------------------------------------------------------------- Rob Bowes (rob@wolflair.com) (559) 658-6995 Lone Wolf Development www.wolflair.com ------------------------ Yahoo! Groups Sponsor ---------------------~--> Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada. http://www.c1tracking.com/l.asp?cid=5511 http://us.click.yahoo.com/mOAaAA/3ex...sNAA/WuQolB/TM ---------------------------------------------------------------------~-> |
#1 |
Guest
Posts: n/a
|
Rob,
Yes, the work around does remove the error. Thanks for taking the time to investigate.. At this point, I just learned that if I wanted to make sure a deck fully validated, I would just restart the program (because it clears the glitch afterwards), but I can avoid doing that for now. Thanks again! -Luke On Sat, 18 Oct 2003 16:47:19 -0700, Rob Bowes wrote: >Hi Luke, > >Neither Colen nor I could reproduce it on our systems, but we >finally >managed to reproduce it on a test machine. After some experimenting, >we >have an idea of what might be going wrong and a possible work-around. > >Try going to the Settings menu, pick the Deck Construction Settings >submenu, then ENABLE the Allow Cards to Have Counts of Zero option. >This >solved the problem for us on the test system. > >We're going to figure out why this problem is actually occurring and >get it >fixed in a V1.3a update. In the meantime, please try the above work- >around >and let us know if it works for you. > >Thanks, Rob ------------------------ Yahoo! Groups Sponsor ---------------------~--> Rent DVDs Online - Over 14,500 titles. No Late Fees & Free Shipping. Try Netflix for FREE! http://us.click.yahoo.com/Tq9otC/XP....kFAA/WuQolB/TM ---------------------------------------------------------------------~-> |
#2 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Progress report | Lawful_g | D&D Miniatures | 13 | December 8th, 2009 05:50 PM |
Bug in 3.0 WAB El Cid files...where to report... | serenissimo at sbcglobal. | Army Builder | 2 | May 3rd, 2005 06:54 AM |