Incomplete Tag

Bidmaron · April 8th, 2014, 07:24 PM

Request when you use the Quick Create feature that it automatically add the 'Incomplete' tag, or at least give you a preference to set that will permit this. That way, when you are stubbing out topics, you don't have to go to the effort to add that tag each time.

pyremius · April 8th, 2014, 07:31 PM

This would be very useful.

Dr_Automaton · April 8th, 2014, 07:48 PM

I think you can pretty much already do this. Click on the tag icon in the upper-left, above the almanac pane to open the Content Scoping Via Tags dialog box. Select the tag(s) you want to auto-assign topics and check the Enable Automatic Assigning of Tags to New Content option.

Bidmaron · April 8th, 2014, 07:50 PM

Well, that is close, but my laziness wants to setup so you only get that incomplete tag when you do quick create. Any other new topic would not get the incomplete tag unless you explicitly assigned it. But thanks for the tip.

rob · April 14th, 2014, 04:07 AM

Not including this was an oversight. It's high on the todo list.

MaxSupernova · April 14th, 2014, 05:58 AM

+1, If it's still useful after Rob's comment.

weogarth · April 27th, 2014, 03:17 PM

I've already done this but automatic is ok too.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Bidmaron Senior Member Join Date: Dec 2010 Posts: 468 April 8th, 2014, 07:24 PM	Request when you use the Quick Create feature that it automatically add the 'Incomplete' tag, or at least give you a preference to set that will permit this. That way, when you are stubbing out topics, you don't have to go to the effort to add that tag each time.
#1

pyremius Senior Member Join Date: Oct 2005 Posts: 222 April 8th, 2014, 07:31 PM	This would be very useful.
#2

Dr_Automaton Senior Member Join Date: Mar 2013 Posts: 150 April 8th, 2014, 07:48 PM	I think you can pretty much already do this. Click on the tag icon in the upper-left, above the almanac pane to open the Content Scoping Via Tags dialog box. Select the tag(s) you want to auto-assign topics and check the Enable Automatic Assigning of Tags to New Content option.
#3

rob Senior Member Lone Wolf Staff Join Date: May 2005 Posts: 8,232 April 14th, 2014, 04:07 AM	Not including this was an oversight. It's high on the todo list.
#5

MaxSupernova Senior Member Join Date: Mar 2014 Posts: 411 April 14th, 2014, 05:58 AM	+1, If it's still useful after Rob's comment.
#6

weogarth Senior Member Join Date: Feb 2013 Posts: 303 April 27th, 2014, 03:17 PM	I've already done this but automatic is ok too.
#7