Junior Member
Join Date: Jun 2010
Location: Los Angeles, California, USA
Posts: 12
|
I have a unit that I need to allow 50% to take a specific option (e.g. 50% of the unit may take bows).
I found some old posts from 2003, but they were using AB 2 (I think). Any suggestions on how to do this? Tim |
#1 |
Senior Member
Volunteer Data File Author
Join Date: May 2005
Location: Grenoble, France
Posts: 167
|
Hello,
1. Create a unitstat with is set to #/2 by script. 2. Create an exclusion group limited by a @unitstat. 3. Each option you need to be limited uses 1 on this exclusion group Or 1. Create an exclusion group limited by # 2. Each option uses 2 on this exclusion group. Note the second solution is easyer to implement, but it round down your division by 2. If you need details on the implementation, just ask Hope that help. Frédéric |
#2 |
Junior Member
Join Date: Jun 2010
Location: Los Angeles, California, USA
Posts: 12
|
Frédéric,
Thanks much! I used the second option and it works great. Thank you again. Tim Quote:
|
|
#3 |
|
|