Rob,
Yes, the work around does remove the error.
Thanks for taking the time to investigate.. At this point, I just
learned that if I wanted to make sure a deck fully validated, I would
just restart the program (because it clears the glitch afterwards),
but I can avoid doing that for now.
Thanks again!
-Luke
On Sat, 18 Oct 2003 16:47:19 -0700, Rob Bowes wrote:
>Hi Luke,
>
>Neither Colen nor I could reproduce it on our systems, but we
>finally
>managed to reproduce it on a test machine. After some experimenting,
>we
>have an idea of what might be going wrong and a possible
work-around.
>
>Try going to the Settings menu, pick the Deck Construction Settings
>submenu, then ENABLE the Allow Cards to Have Counts of Zero option.
>This
>solved the problem for us on the test system.
>
>We're going to figure out why this problem is actually occurring and
>get it
>fixed in a V1.3a update. In the meantime, please try the above work-
>around
>and let us know if it works for you.
>
>Thanks, Rob
------------------------ Yahoo! Groups Sponsor ---------------------~-->
Rent DVDs Online - Over 14,500 titles.
No Late Fees & Free Shipping.
Try Netflix for FREE!
http://us.click.yahoo.com/Tq9otC/XP....kFAA/WuQolB/TM
---------------------------------------------------------------------~->