Lone Wolf Development Forums

Lone Wolf Development Forums (http://forums.wolflair.com/index.php)
-   Army Builder (http://forums.wolflair.com/forumdisplay.php?f=16)
-   -   Army Builder on Windows 7 (http://forums.wolflair.com/showthread.php?t=9340)

SanUriel October 17th, 2009 05:49 PM

Army Builder on Windows 7
 
Hello, I recently ran into a problem with Army builder where I cannot get the program to 'reopen' after I've used the program once and closed it. I always get the error.

The data files couldn't be loaded for the following reasons

Out of System resources.


My computer is running the 64 bit version and I have 4 GB of ram and plenty of hard drive. So what is going on, because I can re-install the program and get 1 good use out of it?

tenaciousb October 19th, 2009 03:40 AM

I have the same problem.

I'm running a Samsung NC10 netbook with 1Gb ram and 32bit Windows 7 Ultimate.

Any help would be much appreciated.

jono October 20th, 2009 06:50 AM

Same thing for me too - worked fine under 3.1, but 3.2 appears to not work under Win7?

gilvagor October 20th, 2009 03:14 PM

I had problems at first as well but if I remember correctly I changed it to run in compatibility mode. But I had problems with Windows 7 so I dumped. I'll try it out again perhaps after Service Pack 1 is released.

Tynethe October 21st, 2009 02:19 PM

Hello
I have a similar problem with Windows 7 64bits :(
I can't activate Army Builder 3.1 even if i have always one licence available.

The other licence works well on Win XP SP2 32bits with Army Builder 3.1.
I check on Lone Wolf licence site admin : one A.B 3.1 licence already available but no way to install it on win7

I don't known if AB 3.2 is better with Windows 7.
Looking others posts, it seems that its does works correctly, bad news

Mathias October 21st, 2009 02:53 PM

Tynethe, do you mean you have AB operating on one computer, and you can't install AB on a second computer? If so, have you gone through the second license procedure in the license menu (in your original copy of AB)?

(sorry I can't help the rest of you - Rob and Colen know how the program is written, and have access to computers with Win7, but it sounds like Tynethe might have a different problem that I do know the answer to).

Tynethe October 22nd, 2009 01:42 PM

Hi
Thanks Mathias, you right i wasn't using the second license procedure, using this menu its works. Sorry for this miss understanding.
Just one other question : to use the new version 3.2a, i have to buy it isn't a extension
Thanks again.

SanUriel October 22nd, 2009 01:47 PM

Matthais,

Could you then please pose the question to those 2?

Mathias October 22nd, 2009 03:31 PM

Quote:

Originally Posted by Tynethe (Post 33665)
Just one other question : to use the new version 3.2a, i have to buy it isn't a extension

3.2 is a free update from 3.1 if your license is still active. Renewing it can be done through the license menu. I'm afraid I don't know if setting up a second license can be done if your license has expired. At a minimum, you'll have to install 3.1, not 3.2 on your second computer (there is a link to 3.1c available in the Army Builder section of www.wolflair.com).

Quote:

Originally Posted by SanUriel (Post 33666)
Matthais,

Could you then please pose the question to those 2?

I've forwarded it. I would presume they've seen it and were still studying the problem, or that gilvagor's suggestion of compatability mode was the correct solution, so there was no need to post and say the same thing.

SanUriel October 23rd, 2009 03:21 AM

Matthais,

I think the compatibility is the answer...thank you very much.


All times are GMT -8. The time now is 01:39 PM.

Powered by vBulletin® - Copyright ©2000 - 2024, vBulletin Solutions, Inc.
wolflair.com copyright ©1998-2016 Lone Wolf Development, Inc. View our Privacy Policy here.